Yellowstone Lake is the largest high-elevation lake in North America, measured above 7,000 feet, and sits at 7,733 feet in northwest Wyoming. A great gift for anyone who has visited, or who loves the outdoors.
Print your own Yellowstone Lake as a clean 3D wall piece, built from real shoreline data and kept true to scale, with north up. You can pick out West Thumb and the long southern arms, including the Southeast Arm. Frank Island is a real cut-out that lets the wall show through, and the 600 size also keeps Stevenson Island and several smaller ones.
What you get
- 250 size: 241 x 250 x 10 mm, fits a 256 mm print bed
- 600 size: 569 x 600 x 18 mm, for large-format printers
- STL file for each size, ready to slice
- STEP file for each size, for editing in Fusion, SolidWorks, Onshape or FreeCAD
Suggested print settings
- Layer height: 0.2 mm, 3 to 4 walls, 10 to 15% infill
- Orientation: flat, with the front face on the plate
- Supports should not be needed, but check the keyhole slots in your slicer preview
Hanging
Keyhole slots are built into the back:
- 250 size: two wood screws 67 mm apart, head up to 8.5 mm, shank up to 4.5 mm
- 600 size: two wood screws 373 mm apart, head up to 8.5 mm, shank up to 4.5 mm
Leave the head standing about 3 mm off the wall, then slide the piece down onto the screw.
On the 250 size the screws sit close together, so use a level when you mark the holes.
To keep the model printable, details thinner than about 2 mm are simplified and very small islands are left out. The images are computer renders, not photos of a print.
Instant digital download. No physical item will be shipped.
This is an independent design based on public map data. It is not affiliated with or endorsed by the US National Park Service or any other holder of the Yellowstone name.
Files are for personal use only; reselling the files or printed parts is not permitted.
Shoreline data © OpenStreetMap contributors, available under the Open Database License. See openstreetmap.org/copyright.
