Round off table tops, cutting boards, shelves and box lids with a clean, repeatable corner every time. Hook the template on the corner, clamp it and follow it with a bearing router bit.
HOW IT WORKS
Two reference lips under the plate catch both edges of your board, so the curve lines up on the corner without measuring or marking. Clamp the template down, then rout around the curve with a pattern bit (bearing on the shank) or flip the work and use a flush-trim bit (bearing on the tip). The bearing rides on the 10 mm (0.4 in) template edge and the bit copies the radius into the wood. Small marks on the top face show exactly where the curve starts and ends.
SIZES
- 1/4", 1/2", 3/4" and 1": plate 125 x 125 mm (4.9 x 4.9 in)
- 1-1/2": plate 135 x 135 mm (5.3 x 5.3 in)
- 2": plate 148 x 148 mm (5.8 x 5.8 in)
- Set of 6: all six radii, one of each
Every template is 10 mm thick with lips 9 mm deep, and the radius is engraved on the top face in inches and millimetres. A hole in the corner lets you hang it on the shop wall.
GOOD TO KNOW
- Works on boards about 12 mm (1/2 in) thick and up, so the lips have something to grip.
- Take light passes, or cut most of the waste with a jigsaw first, then clean up with the router.
- Router bit and clamps are not included.
MADE TO ORDER
Each template is 3D printed to order in tough PETG by our production partner in the USA and checked before it ships. Please allow 3 to 5 business days. As a 3D printed part it shows fine layer lines on the edges; these do not affect the guide surface.
ABOUT THE PHOTOS
The images are computer renders made from the exact 3D model you receive, so the shape and sizes match. The colour of the printed part may vary slightly.
