Turn your leaf blower into a fast inflator. This adapter slides over the round tube end of your blower and steps down to a cone tip that fits valves from about 13 to 34 mm across, so it works with most air mattresses, pool floats, inflatable pools and tubes.
GOOD TO KNOW
A leaf blower moves a lot of air at low pressure. It fills inflatables very quickly, but for items that need to be rock hard (paddle boards, kayaks) finish with a proper pump. Never use it on anything with a pressure rating above what a blower can give, and keep the blower on a low setting for small toys.
WHICH SIZE
Measure the outside of your blower's ROUND tube end (calipers, or wrap a tape around it and divide by 3.14). Each size fits a 3 mm range:
- 42-45 mm (1.65-1.77 in)
- 45-48 mm (1.77-1.89 in)
- 48-51 mm (1.89-2.01 in)
- 66-69 mm (2.60-2.72 in)
- 69-72 mm (2.72-2.83 in)
- 72-75 mm (2.83-2.95 in)
- 75-78 mm (2.95-3.07 in)
- 78-81 mm (3.07-3.19 in)
- 81-84 mm (3.19-3.31 in)
- 84-87 mm (3.31-3.43 in)
- 87-90 mm (3.43-3.54 in)
- 90-93 mm (3.54-3.66 in)
- 93-96 mm (3.66-3.78 in)
- 96-99 mm (3.78-3.90 in)
Round tube ends only, no size yet for 51-66 mm tubes.
FITTING
Slide it over the tube until the tube stops against the inner lip, then tighten a hose clamp (not included) in the channel between the two raised rings.
FIT GUARANTEE
Wrong size or does not fit? We replace it or refund you.
MADE TO ORDER
Our own original design, 3D printed to order in tough PETG by our production partner in the USA. Please allow 3 to 5 business days.
ABOUT THE PHOTOS
The images are renders made from the exact 3D model we print.