A wall sundial only tells the right time where it was designed for. This one is calculated for Phoenix: the hour lines are laid out for a south-facing wall at 33.45 degrees north, and the gnomon stands at the matching angle, so on a sunny day the shadow lands on the right hour.
MADE FOR PHOENIX
Because Phoenix sits 28 minutes of sun time west of its time zone's meridian, the hour lines are shifted to match, so solar noon falls where it should on your clock. It reads standard time, which in Arizona is the time all year round.
WHICH WALL
It needs a sunny wall that faces south. If your wall is turned a little east or west of south, choose the 5 or 10 degree option: you get three wedge spacers that sit behind the screw holes and turn the dial back to true south. Walls more than about 12.5 degrees off south are not suitable for this dial. To check, hold a phone compass flat against the wall with True North switched on.
SET-UP
1. Hold it on the wall with the bottom edge level.
2. Screw it on through the 3 countersunk holes (#8 or 4 mm screws and wall plugs, not included; use longer screws with spacers).
3. Push the gnomon into its slot, with a drop of outdoor glue for a permanent fit.
ACCURACY
A sundial follows the real sun, which runs up to about 16 minutes ahead of or behind the clock over the year (the equation of time). It is spot on around mid-April, mid-June, September 1 and Christmas. A south wall gets the sun from about mid-morning to mid-afternoon in summer, and all day in winter.
DETAILS
- 250 x 300 mm (9.8 x 11.8 in) arched panel, 6 mm thick, gnomon stands out about 10 cm
- Roman hour numerals, half and quarter hour marks, city name and coordinates engraved
- Light face with dark engraving (two-colour print)
- Printed in UV and weather-resistant ASA
MADE TO ORDER
3D printed to order by our production partner in the USA. Please allow 3 to 5 business days.
ABOUT THE PHOTOS
The product images are computer renders made from the exact 3D model we print, so the shape, hour lines and sizes match. Real prints show fine layer lines and colours may vary slightly.