Turn your leaf blower's narrow, harsh jet into a wider stream that moves more air. This slip-on venturi nozzle fits blowers with a ROUND tube end, in 14 sizes from 42 to 99 mm across. Pick the size that matches your tube.
HOW IT WORKS
The blower's air leaves through an inner jet inside a wider outer duct. As the jet passes eight side windows it pulls outside air in with it (the venturi or air amplifier effect), so more air comes out of the mouth, spread over a wider area and at a lower speed. Good for clearing leaves and grass off lawns and decks, drying cars and bikes, and blowing out the garage without kicking up gravel.
WHICH SIZE
Measure the outside of your blower's round tube end with calipers, or wrap a tape measure around it and use the circumference. Each size fits a 3 mm range:
- 42-45 mm (1.65-1.77 in): tube circumference 132-141 mm (5.2-5.6 in), 128 mm long, hose clamp SAE #28
- 45-48 mm (1.77-1.89 in): tube circumference 141-151 mm (5.6-5.9 in), 134 mm long, hose clamp SAE #28
- 48-51 mm (1.89-2.01 in): tube circumference 151-160 mm (5.9-6.3 in), 140 mm long, hose clamp SAE #32
- 66-69 mm (2.60-2.72 in): tube circumference 207-217 mm (8.2-8.5 in), 181 mm long, hose clamp SAE #44
- 69-72 mm (2.72-2.83 in): tube circumference 217-226 mm (8.5-8.9 in), 187 mm long, hose clamp SAE #44
- 72-75 mm (2.83-2.95 in): tube circumference 226-236 mm (8.9-9.3 in), 193 mm long, hose clamp SAE #48
- 75-78 mm (2.95-3.07 in): tube circumference 236-245 mm (9.3-9.6 in), 199 mm long, hose clamp SAE #48
- 78-81 mm (3.07-3.19 in): tube circumference 245-254 mm (9.6-10.0 in), 204 mm long, hose clamp SAE #52
- 81-84 mm (3.19-3.31 in): tube circumference 254-264 mm (10.0-10.4 in), 210 mm long, hose clamp SAE #52
- 84-87 mm (3.31-3.43 in): tube circumference 264-273 mm (10.4-10.8 in), 216 mm long, hose clamp SAE #56
- 87-90 mm (3.43-3.54 in): tube circumference 273-283 mm (10.8-11.1 in), 222 mm long, hose clamp SAE #56
- 90-93 mm (3.54-3.66 in): tube circumference 283-292 mm (11.1-11.5 in), 228 mm long, hose clamp SAE #60
- 93-96 mm (3.66-3.78 in): tube circumference 292-302 mm (11.5-11.9 in), 234 mm long, hose clamp SAE #60
- 96-99 mm (3.78-3.90 in): tube circumference 302-311 mm (11.9-12.2 in), 240 mm long, hose clamp SAE #64
Exactly on a boundary? Both sizes fit; the larger one slides on more easily. It does not fit flat, oval or square nozzles, and there is no size yet for 51-66 mm tubes.
FITTING
Slide it over the tube until the tube stops against the inner lip, then tighten a hose clamp in the channel between the two raised rings. Slots in the collar let it close down around your tube for a firm grip. Takes about a minute with a screwdriver.
HOSE CLAMP NOT INCLUDED
The metal hose clamp is not included. Any standard stainless worm-drive hose clamp of the SAE size listed for your nozzle fits; they are sold at every hardware store.
DETAILS
- 14 sizes for round tubes from 42 to 99 mm outside diameter
- One piece, printed in tough PETG
- 8 side intake windows, wide mouth about 1.5 times the tube size
- Metal hose clamp not included
- Our own original design
MADE TO ORDER
3D printed to order by our production partner in the USA. Please allow 3 to 5 business days.
ABOUT THE PHOTOS
The product images are computer renders made from the exact 3D model we print, so the shape, sizes match. Real prints show fine layer lines and colours may vary slightly.